24/7 Service
24/7 Service
Installing the Lighting Way D-series LED headlights is easy, especially if you want to upgrade from the HID Xenon bulbs. If you find it complicated to change D-series (D1, D2, D3, D4) HIDs to LED bulbs WITHOUT OEM BALLASTS, here’s how to make the task simple!
1. Remove the headlight assembly out from your car.
2. Find the ballast and headlight.
4. Press and open the clip and take out the original HID Xenon bulb.
5. Take off the wires and igniter from the ballast.
6. Take off the chuck from the LED bulb and lock it by the clip, then put the LED bulb into the chuck.
7. You need to adjust the LED bulb's wire at the right angle. Then take out the LED bulb's plug to connect to the light source before closing the dust cover.
8. Put the ballast back to the original place before unloading all wires or igniter.
9. Install the headlight assembly back to your car.
{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}
Seleccione el primer artículo para comparar
Seleccione el segundo artículo para comparar
Seleccione el tercer elemento para comparar
Dejar un comentario